docker 搭建iotdb集群2版本的

1、如果之前存在network网络需要清理一下

docker-compose down -v --remove-orphans

2、新建目录

mkdir -p /home/iotdb/confignode/data mkdir -p /home/iotdb/confignode/logs mkdir -p /home/iotdb/datanode/data mkdir -p /home/iotdb/datanode/logs

3、三台机器分别建立docker-compose-standalone.yml文件
3.1 第一台

version: "3" services: iotdb-confignode: image: apache/iotdb:2.0.6-confignode container_name: iotdb-confignode command: ["bash", "-c", "entrypoint.sh confignode"] restart: always environment: - cn_internal_address=10.1.19.191 - cn_internal_port=10710 - cn_consensus_port=10720 - cn_seed_config_node=10.1.19.191:10710 - schema_replication_factor=3 - data_replication_factor=2 privileged: true volumes: - /home/iotdb/confignode/data:/iotdb/data - /home/iotdb/confignode/logs:/iotdb/logs network_mode: "host" iotdb-datanode: image: apache/iotdb:2.0.6-datanode container_name: iotdb-datanode command: ["bash", "-c", "entrypoint.sh datanode"] restart: always ports: - "6667:6667" privileged: true environment: - dn_rpc_address=10.1.19.191 - dn_internal_address=10.1.19.191 - dn_seed_config_node=10.1.19.191:10710 - dn_rpc_port=6667 - dn_internal_port=10730 - dn_mpp_data_exchange_port=10740 - dn_schema_region_consensus_port=10750 - dn_data_region_consensus_port=10760 - schema_replication_factor=3 - data_replication_factor=2 volumes: - /home/iotdb/datanode/data:/iotdb/data - /home/iotdb/datanode/logs:/iotdb/logs network_mode: "host"

3.2 第二台

version: "3" services: iotdb-confignode: image: apache/iotdb:2.0.6-confignode container_name: iotdb-confignode command: ["bash", "-c", "entrypoint.sh confignode"] restart: always environment: - cn_internal_address=10.1.19.192 - cn_internal_port=10710 - cn_consensus_port=10720 - cn_seed_config_node=10.1.19.191:10710 - schema_replication_factor=3 - data_replication_factor=2 privileged: true volumes: - /home/iotdb/confignode/data:/iotdb/data - /home/iotdb/confignode/logs:/iotdb/logs network_mode: "host" iotdb-datanode: image: apache/iotdb:2.0.6-datanode container_name: iotdb-datanode command: ["bash", "-c", "entrypoint.sh datanode"] restart: always ports: - "6667:6667" privileged: true environment: - dn_rpc_address=10.1.19.192 - dn_internal_address=10.1.19.192 - dn_seed_config_node=10.1.19.191:10710 - dn_rpc_port=6667 - dn_internal_port=10731 - dn_mpp_data_exchange_port=10741 - dn_schema_region_consensus_port=10751 - dn_data_region_consensus_port=10761 - schema_replication_factor=3 - data_replication_factor=2 volumes: - /home/iotdb/datanode/data:/iotdb/data - /home/iotdb/datanode/logs:/iotdb/logs network_mode: "host"

3.3 第三台

version: "3" services: iotdb-confignode: image: apache/iotdb:2.0.6-confignode container_name: iotdb-confignode command: ["bash", "-c", "entrypoint.sh confignode"] restart: always environment: - cn_internal_address=10.1.19.193 - cn_internal_port=10710 - cn_consensus_port=10720 - cn_seed_config_node=10.1.19.191:10710 - schema_replication_factor=3 - data_replication_factor=2 privileged: true volumes: - /home/iotdb/confignode/data:/iotdb/data - /home/iotdb/confignode/logs:/iotdb/logs network_mode: "host" iotdb-datanode: image: apache/iotdb:2.0.6-datanode container_name: iotdb-datanode command: ["bash", "-c", "entrypoint.sh datanode"] restart: always ports: - "6667:6667" privileged: true environment: - dn_rpc_address=10.1.19.193 - dn_internal_address=10.1.19.193 - dn_seed_config_node=10.1.19.191:10710 - dn_rpc_port=6667 # 注意 下方配置不同虚机的端口需要不一样的 - dn_internal_port=10732 - dn_mpp_data_exchange_port=10742 - dn_schema_region_consensus_port=10752 - dn_data_region_consensus_port=10762 - schema_replication_factor=3 - data_replication_factor=2 volumes: - /home/iotdb/datanode/data:/iotdb/data - /home/iotdb/datanode/logs:/iotdb/logs network_mode: "host"

4、然后启动

version: "3" services: iotdb-confignode: image: apache/iotdb:2.0.6-confignode container_name: iotdb-confignode command: ["bash", "-c", "entrypoint.sh confignode"] restart: always environment: - cn_internal_address=10.1.19.193 - cn_internal_port=10710 - cn_consensus_port=10720 - cn_seed_config_node=10.1.19.191:10710 - schema_replication_factor=3 - data_replication_factor=2 privileged: true volumes: - /home/iotdb/confignode/data:/iotdb/data - /home/iotdb/confignode/logs:/iotdb/logs network_mode: "host" iotdb-datanode: image: apache/iotdb:2.0.6-datanode container_name: iotdb-datanode command: ["bash", "-c", "entrypoint.sh datanode"] restart: always ports: - "6667:6667" privileged: true environment: - dn_rpc_address=10.1.19.193 - dn_internal_address=10.1.19.193 - dn_seed_config_node=10.1.19.191:10710 - dn_rpc_port=6667 # 注意 下方配置不同虚机的端口需要不一样的 - dn_internal_port=10732 - dn_mpp_data_exchange_port=10742 - dn_schema_region_consensus_port=10752 - dn_data_region_consensus_port=10762 - schema_replication_factor=3 - data_replication_factor=2 volumes: - /home/iotdb/datanode/data:/iotdb/data - /home/iotdb/datanode/logs:/iotdb/logs network_mode: "host"

5、注意不同虚机下的- dn_internal_port=10732
- dn_mpp_data_exchange_port=10742
- dn_schema_region_consensus_port=10752
- dn_data_region_consensus_port=10762几个端口号需要不同才行

6、如果通过容器进行访问则执行如下命令：

dockerexec-itiotdb /iotdb/sbin/start-cli.sh-h0.0.0.0-p6667-uroot-pwroot